Filter
Top Products
WARNING: After every use, press steam delivery button until all pressure has
been released before removing safety cap.
1. Unscrew the safety cap. (After first use, turn the appliance
over in order to completely empty the boiler.)
2. Fill the measuring cup with water to the marked water
line, once. Use the funnel to pour the water into the boiler.
The boiler takes only one measuring cup of water at a
time. (6 oz. maximum) Do not overfill.
NOTE: Never put descaling, aromatic, alcoholic or detergent products into the
appliance, as this may damage it or make it unsafe for use.
3. Screw the cap back onto the appliance.
Attachments (may vary by model)
4. The straight nozzle, flexible hose and fabric tool all attach using the following
directions.
HOW TO ASSEMBLE AND USE
7
INSTRUCTIONS FOR USE
The Eureka Hot Shot™ hand held steamer is designed to thoroughly clean hard surfaces
and upholstery that will withstand high heat. Do not use on soft plastics, unsealed wood,
and cold glass.
WARNING: On surfaces that have been treated with wax or some no wax floors,
the sheen may be removed by the heat and steam action. Do not use
on unsealed wood. This could cause the woodgrain to rise.
It is therefore recommended that a sample cleansing be carried out
on an isolated area of the surface to be cleaned. Also, check use and
care instructions from the manufacturer on the object you want to
clean.
Do not plug unit into an electrical outlet until Step 7.
Align the single mark on the attachment
to the single mark on the appliance. Push
the attachment onto the articulating nozzle
until it stops against the appliance’s body.
Turn in a clockwise direction until the
single mark on the attachment is aligned
with the double mark on the appliance.
The attachment is now locked into
position.
Gasket
Articulating Nozzle
Straight Nozzle
Flexible Hose
Fabric Tool