Filter
Top Products
8
HOW TO ASSEMBLE AND USE (continued)
Hexagonal end
of nozzle
Angled NozzleScrub Brush
The Hot Shot’s articulating nozzle allows the
steam to be directed as desired. To use the
articulating nozzle, align the single marks on the
attachment and appliance, push the attachment
onto the articulating nozzle until it covers the
round gasket (See page 7). Now turn clockwise
until the single mark on the attachment is aligned
with the double mark on the appliance. Now you
can direct the steam as desired.
Hinges
Tabs
Window Cleaning Tool Fabric Tool
5. To attach the scrub brush and angled
nozzle.
Both of these attachments can be applied to the articulated nozzle (on appliance)
straight nozzle, and the flexible extension hose.
Decide on your desired angle, then push the attachment onto the hexagonal end of
the nozzle.
6. To attach the window cleaning tool.
CAUTION: Do not use the window cleaning tool on cold glass. It may break
the glass.
First attach the fabric tool to either the appliance or the flexible extension hose.
Remove the cloth from the fabric tool. There are two open tabs on the back edge of
the fabric tool and there are two hinges on the back edge of the window cleaning
tool. Place the hinges into the open tabs, then swing the window cleaning tool up
against the bottom of the fabric tool until the two pieces click together. To remove
the window cleaning tool from the fabric tool. Just push your thumb against the
fastener on the window cleaning tool, they will separate.