Eureka 350 Series Electric Steamer User Manual


 
As soon as the Hot Shot emits steam, begin using it, passing slowly over the surfaces
to be cleaned. This is the ideal method for thoroughly cleaning your surfaces. To
disinfect specific areas, leave the Hot Shot over the spot, no more than 1 inch and
slowly move across the surface.
How to start the Hot Shot
7. Plug the appliance into an electrical outlet.
WARNING: Never turn the hand held steamer over when using steamer, or
direct steam at any person, animal, or plant.
9
How to refill the Hot Shot when it is out of steam.
8. Unplug the appliance. Press steam delivery button until all pressure has been
released. Wait for about 3 minutes before carefully unscrewing the safety cap.
Turn slowly a half turn and wait for the hissing noise created by residual steam to
stop. Unscrew the cap completely and allow to cool. Slowly pour one measuring
cup (included) into the boiler using the funnel, (included). (6 oz. maximum) Do not
overfill. Screw the safety cap back on the appliance. Plug the appliance into electrical
outlet and steam will start to be produced as before.
WARNING: This unit is under pressure. After every use, press steam delivery
button until all pressure has been released before removing safety
cap.
Cleaning and Maintenance
NOTE: The appliance must be unplugged from the electrical outlet and allowed
to cool down before all cleaning and maintenance tasks.
9. Let the appliance cool down completely before cleaning it or putting it away.
10. After each use empty any remaining water from the boiler.
11. Store in a dry, cool place.
12. In order to guarantee perfect functioning over a long period of time, the boiler needs
to be rinsed out with water once a month to eliminate any accumulated calcium
deposits. Do not use vinegar or other descaling substances. Put in one measure
of water, replace the safety cap and shake to loosen any accumulated deposits.
Remove safety cap and immediately empty water into a sink. CAUTION: Do not
immerse the appliance in water.
Steam Delivery
Button
Power On
Light
The power on light will come on. Steam will be
ready after about 3 to 4 minutes. Do not leave the
appliance unattended during the waiting period.
Press steam delivery button to release steam.