Filter
Top Products
OPERATING INSTRUCTIONS (cont.)
5
How To Attach the Hand Mixer to
the Stand
• The stand for the Power Mixer has
two tabs on top. (Fig. 1)
• The power mixer has two slots next to
the holes for inserting the
attachments. (Fig. 2)
• Hold the power mixer in your right
hand at an angle. Slide it from left
to right securing the two tabs on the
stand into the two slots on the power
mixer. (Fig. 3)
• Push the power mixer down on the
stand to engage the lock (Fig. 4) that
secures the power mixer to the stand.
(Fig. 5)
Note: To lock the power mixer onto the
stand more easily, push the lock release
button as you are lowering the power
mixer down onto the stand. (Fig. 6)
Fig.1
Fig.2
Fig.3
Fig. 4
Fig.5
Fig.6
6
OPERATING INSTRUCTIONS
How To Remove the Hand Mixer to
the Stand
• To remove the power mixer from
the stand, push the lock release
button and lift the power mixer
upwards. (Fig. 7)
• In order to lift the power mixer while it
is still on the stand, push the locking
button and pull the power mixer
upwards. (Fig. 8 & 9)
Fig.7
Fig. 8
Fig. 9
CLEANING & STORAGE
• Ensure that the mixer is unplugged
and switched off before removing and
cleaning the attachments.
• Wash the beaters and glass bowl
in warm, soapy water or dishwasher.
• Clean the stand by wiping with a
damp cloth.
• Never immerse the power mixer in
water or any other liquid.
• Push the cord rewind button while
holding the plug for the cord to
rewind.
• You can store 1 set of the
attachments on the side of the
stand for easier storage.
Caution: Do not pull with force on the
power cord or you will damage the
rewinding feature and void the warranty.
When rewinding, always hold the plug to
avoid cord whipping.