Filter
Top Products
RE-SETTABLE THERMAL SAFETY DEVICE
Your EP90 Food Processor has been designed with a unique safety system which prevents
damage to the unit’s motor and drive system, should you inadvertently overload your appliance.
The safety system will automatically cut the electric power to the appliance when the device
senses an overload or excessive temperature in the motor or drive system. Should this occur
during use and the appliance stops functioning, follow the re-setting procedure below:
1. Turn the “ON/OFF” speed control (4) to the “OFF” position
2. Unplug the unit from the wall receptacle.
3. Remove and empty either the blender flask or processor bowl (whichever is being used).
Ensure that no food is jamming the cutting blades or attachments.
4. Allow the appliance to cool down for a minimum of 30 minutes.
5. Re-install the processor bowl or blender flask and re-plug appliance in the wall outlet.
6. Proceed to use the appliance as before. Should the appliance still fail to operate, turn the
“ON/OFF” speed control (4) to the “OFF” position and unplug from the wall outlet. Allow
the appliance to cool down for an additional 1 to 2 hours. After this time has passed,
repeat the restart procedure, steps 5 and 6 above.
10