Filter
Top Products
8
Read all the sections of this booklet and follow all the instructions carefully.
Before Using Your Toaster Oven
1. Read all of the instructions included in this manual.
2. Make sure that the oven is unplugged and the time control is in the “OFF”
position.
3. Wash all the accessories in hot, soapy water or in the dishwasher.
4. Thoroughly dry all accessories and re-assemble in oven. Plug oven into outlet
and you are ready to use your new Toaster Oven.
5. After re-assembling your oven, we recommend that you run it at the highest
temperature (450°F) on the toast function for approximately 15 minutes to
eliminate any packing residue that may remain after shipping. This will also
remove all traces of odor initially present.
Please Note: Initial start-up operation may result in minimal smell and smoke
(about 15 minutes). This is normal and harmless. It is due to
burning of the protective substance applied to the heating
elements in the factory.
3
Keep Warm
Keep cooked food warm for up to 30 minutes. Longer periods of time are not re-
commended as food will become dry or wil
l spoil.
Operation
• Set the temperature control to 150°F.
• Turn the function control to “Keep Warm”.
• Turn the time control to the “Stay On” position.
• Turn the time control to the “Off” position when finished with keep warm.
Caution: When sliding trays out of oven, always support the rack. Do not let go
until you are sure the rack is securely supported by the rack handle.
Care & Cleaning
Warning: Be sure to unplug the oven and allow it to cool before cleaning.
To clean your oven, wipe the walls with a damp sponge, cloth or nylon scouring pad
and mild detergent. DO NOT USE STEEL WOOL SCOURING PADS, ABRASIVE
CLEANERS OR SCRAPE THE WALLS WITH A METAL UTENSIL, AS THIS MAY
DAMAGE THE UNIT.
All accessories should be washed in hot soapy water or can be cleaned in a
dishwasher. The door can be wiped with a damp sponge and wiped dry with a paper
or cloth towel. Clean the outside with a damp sponge. DO NOT USE AN ABRASIVE
CLEANER AS IT MAY DAMAGE THE EXTERIOR FINISH.
DO NOT USE AN ABRASIVE CLEANER OR STEEL WOOL SCOURING PAD ON
THE DRIP PAN AS IT MAY DAMAGE THE PORCELAIN ENAMEL FINISH.
LET ALL PARTS AND SURFACES DRY THOROUGHLY PRIOR TO PLUGGING
OVEN IN AND USING.