CAUTION & SAFEGUARDS
1. To protect against risk of electrical shock, do not put motor base in
water or other liquid.
2. Unplug the power cord from the wall outlet when the unit is not
in use, before putting on or taking off parts, and before cleaning other
than washing the container.
3. Never contact moving parts.
4. Do not use outdoors.
5. Do not let the power cord hang over edge of table or counter, or
touch hot surfaces.
6. Keep hands and utensils out of the container while the motor
is running to prevent the possibility of severe personal injury and/or
damage to the unit. A rubber scraper may be used, but only when the
unit is not running.
7. The blade is very sharp and requires carefull handling. Never try to
remove blade while container is sitting on the motor base. Do not operate
with loose or damaged blades. To reduce the risk of personal injury,
never place blade assembly on motor base without blender container
properly attached.
8. Always operate with the lid in place.
9. NEVER bang the container against a surface to loosen the ingredients.
Remove the container from the base and use a rubber spatula to
remove thick mixtures from the bottom of your container.
10. NEVER shake or rattle a container in use while seated on
the motor base.
11. NEVER remove the container before the machine has come to a
complete stop.
12. NEVER start the motor before the container is in place.
13. Keep children away when the blender is in use.
On most models, the power cord comes equipped with a three-prong
(grounding) plug which mates with a standard three-prong wall outlet
(Figure A). Please use approved 2 prong adapters(Figure B) when a
ground is not available. Do not cut or remove the round grounding prong
from the power cord.
10