Excalibur electronic EXB4300 Blender User Manual


 
11
TROUBLESHOOTING
Problem
Solution
1. Blender fails to start
2. Stopped
3. Ingredients do not mix properly
1. Place container properly on the base.
2. Check to ensure controls are clean
and moving freely.
3. Double-check to ensure power cord is
securely plugged into the electric outlet.
4. Check to see if the circuit breaker has
tripped or if the fuse for the electric
outlet has blown.
1. Unplug blender and wait 5 minutes.
2. Plug the blender back in and resume
operation.
1. Container is too full.
2. Cutter unit blades are not sharp
enough or are damaged.
3. Solid pieces are bigger than 1"
(25mm) cubes.
4. Check the speed to create a fluid
blend.
5. Check to see if enough liquid has
been added to the ingredients. Mixture
should be fluid and free-running at all
times.
MAINTENANCE
Inspect the blender and its various parts and replace as follows:
Daily
Weekly
Quarterly
1. Unplug the blender and remove the
container from the base.
2. Inspect the container blades for wear,
nicks, and broken or loose blades.
Replace if necessary.
1. Unplug the blender.
2. Inspect the power cord insulation and
power plug for cracks. Refer to
"Technical Service" for repair or
replacement.
1. Review the condition of the container
assembly and Mushroom Clutch Set at
least every 90 days.
2. Replace if necessary.
Replacement Parts
For replacement parts, call toll free: # 1-877-368-2797