Filter
Top Products
9
13. Unscrew the upper hinge axis, turn the
upper hinge over and fi x axis on it. Then
place it aside for later use.
14. Realign the wires on the left and right
slots of the refrigerator body as shown
below.
15. Place the door in the correct position,
adjust the upper hinge plastic part. Move
the earth wire into the slot on the upper
door from right to left and then fasten the
upper hinge and earth wire with the self-
tapping screws. Hold door in place when
installing.
16. Connect reed switch according to step 3
(page 7) and then install the upper hinge
cover (in plastic bag).
17. Turn the corner cover of the door 180°
and install it onto the right corner of the
upper door, then mount the upper cover
of the upper door.
18. Take the reed switch out of the cover
(part 3 in step 3) and mount it on the
spare cover (found in spare parts bag,
marked with an R). Put the cover you just
removed in the parts bag.
Note: Be sure the front side of the reed
switch fi ts correctly when mounting.
19. Install the corner cover, connect the reed
switch and install the upper cover of the
upper door.
20. Open the upper door, mount door racks
and then securely close the door.
①
②
③
1 2
1
3
2
②
①
upper hinge cover (left)