Filter
Top Products
14
Using the touch controls
The cooking zone and timer displays also function as
touch controls. To select a cooking zone or the timer,
simply touch its display. Use the ball of your finger, not its
tip. The controls respond to touch, so you don’t need to
apply any pressure.
Once you have selected a cooking zone or the timer, you
have 10 seconds to set it (while the little red light at the
bottom right of the display is on). If the little red light
goes out before you have had a chance to select a setting,
simply re-select the cooking zone or timer by touching its
display again.
Make sure the controls are always clean, dry, and there
is no object (eg a utensil or a cloth) covering them.
Even a thin film of water may make the controls
difficult to operate.
To select a setting on the selector:
Using your cooktop
Touch at one point to “jump” to a
specific setting
OR
slide your finger along the
selector.