Filter
Top Products
21
Alert code Possible causes What to do
The pan is too heavy for the pan
supports to lift.
The pan support pins are stuck in
the down position because of spilled
food.
The pan supports are stuck in the up
position.
Remove the pan, let the pan supports
rise up, and then place the pan back
on the pan supports.
Try to remove the food with a damp,
soapy, soft cloth.
If you cannot remove the food, then
call your Authorised Service Centre or
Customer Care.
Clean the pan supports as described in
the ‘Care and cleaning’ section.
If the pan supports will not lower after
cleaning, call your Authorised Service
Centre or Customer Care.
The burner has extremely
overheated. (This only happens
after very long use at maximum
temperatures.)
Wait for the cooktop to cool down.
Once the code has disappeared, you
can use your burner again.
No gas.
Draughts from an open window or
other ventilation are causing the
burner to go out on low settings.
Food on the igniter.
Check your gas supply, then turn the
cooktop off and on again. If you have
checked your gas supply and the
cooktop displays this code again, call
your Authorised Service Centre.
The cooktop continuously monitors
each burner to make sure the flame
does not go out, and relights it if it
does. If the system cannot relight
a burner, it shuts off the gas, and
displays this code. Call your Authorised
Service Centre or Customer Care.
Call your Authorised Service Centre or
Customer Care.
Alert codes
Individual burner codes
2 bars
3 bars
4 bars