Filter
Top Products
27
US CA
Fault codes
Fault Codes Possible Causes What to Do
F1
Flood switch has been
activated.
Turn the water and power supply to the
DishDrawer® off and call your Authorized
Service Center.
F2
Motor problem. Call your Authorized Service Center.
F3
Temperature sensor
failed.
Ensure water coming in through the inlet
hose is less than 149
o
F. You may need to
install a tempering valve on your water
supply.
F4
Faulty temperature
sensor or element
Call your Authorized Service Center.
F5
Lid fault
1
Turn power supply to DishDrawer off,
then turn on power supply. Fault may
reset.
2
Call your Authorized Service Center.
F6
Lid fault
1
Turn power supply to DishDrawer off,
then turn on power supply. Fault may
reset.
2
Call your Authorized Service Center.
F7
Lid fault Call your Authorized Service Center.
F8
Electrical problem
1
Turn power supply to DishDrawer off.
2
Call your Authorized Service Center.
F9
Electronics
malfunction.
Call your Authorized Service Center.