Fisher & Paykel DD24DT 7 Dishwasher User Manual


 
4
PARTS SUPPLIED - ALL MODELS
ADDITIONAL PARTS SUPPLIED WITH INTEGRATED MODELS
3a
3b
If the Drain hoses supplied are not long enough
to reach your services, you must use a Drain Hose
Extension Kit P/N 525798 which will extend the drain
hoses by 11’ 10” (3.6m).
The kit is available from the nearest Fisher & Paykel
Authorized Service Center, or Toll free 1.888.936.7872
or www.fisherpaykel.com
Panel bracket (2)
(attached to product)
Wire clip (2)
(for securing
Drain hose joiner)
Phillips
⁄” (16 mm)
screws (9)
Drain hose
support (1)
Moisture protection
tape (1)
(to prevent moisture
damage)
Drain hose
joiner (1)
Top
mounting
brackets (2)
OPTIONAL
Prefinished toekick (1)
Hexagonal
socket for feet
adjustment (2)
(long & short)
Side mounting
bracket kit
(A and B) (2)
OPTIONAL
Panel mounting
screws (12)
Toekick
mounting
screws (5)
Toekick mounting bracket (1)
(A custom toekick panel of any
material with thickness
⁄”-¾ ” (9 - 19 mm) can be screwed
to the plastic toekick mounting
bracket)
Edge Protector (1)
(If the services hole is through
a metal partition the hole
must be protected with the
Edge protector supplied to
prevent damage to the power
cord or hoses.)
Clamp (1)
(for securing
Drain hose joiner)
Rubber
washer for
inlet hose (1)
(comes already
fitted)