Filter
Top Products
12
INSTALLATION INSTRUCTIONS
Water supply connection
ImpORTANT!
It is recommended to have this product installed by a qualified technician.
DO NOT use with water that is microbiologically unsafe or of unknown quality.
WARNING – connect to potable water supply only to ensure water hygiene in the
icemaker and water dispenser.
DO NOT install on line pressure above 600kPa or below 150kPa.
DO NOT use on hot water supply (25°Cmax).
DO NOT cut any length of tube shorter than 500mm.
DO NOT install near electrical wires or water pipes that will be in the path of drilling
when selecting the location of the filter system.
DO NOT mount the filter in such a position that it will be struck by other items, such
as wastebaskets, etc.
DO NOT install the filter or any water tubing in direct sunlight as prolonged exposure
to light can weaken plastic components.
DO NOT install the filter in a location that is susceptible to freezing temperatures as
damage to the filter housing could occur.
DO NOT screw the filter to the refrigerator.
DO NOT install the filter or any water tubing in high temperature areas eg in a ceiling
cavity.
AVOID contamination of pipes during installation.
DO NOT use copper tubing. The plastic tubing supplied should always be used.
DO NOT continuously dispense water for a period longer than 1 minute.
The water connection instructions are intended for the professional installer.