Filter
Top Products
24
Co
ntrol panel locking
To avoid modifying a setting of cooking zones , in particular with within the framework of cleaning
the control panel can be locked (with exception to the On/Off key [ ]).
Locking :
Ac
tion
Co
ntrol panel
Di
splay
St
art Press key [ ] 3 or 4 x [ 0 ] or [ H ]
Hob locking Press simultaneously [ - ] and [ + ]
at front right** No modification
Repress key [ + ] 3 or 4 x [ L ]
Unlocking :
Ac
tion
Co
ntrol panel
Di
splay
St
art Press key [ ] 3 or 4 x [ L ]
In the 5 seconds after start :
Un
locking the hob Press simultaneously [ - ] and [ + ]
at front right** 3 or 4 x [ 0 ]
Repress key [ - ] No light on the
Displays
** for the 3 zone hob use [ + ] from the front left zone display
CO
OKING ADVICES
Pa
n quality
Adapted materials : steel, enamelled steel, cast iron, ferromagnetic stainless-steel,
aluminium with ferromagnetic bottom.
Not adapted materials : aluminium and stainless-steel without ferromagnetic bottom,
cupper, brass, glass, ceramic, porcelain.
The manufacturers specify if their products are compatible induction.
To check if pans are compatibles :
Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This water
must heat in a few seconds.
A magnet stucks on the bottom of the pan.
Certain pans can make noise when they are placed on an induction cooking zone. This noise
doesn’t mean any failure on the appliance and doesn’t influence the cooking operating.
Pan dimension
The cooking zones are, until a certain limit, automatically adapted to the diameter of the pan.
However the bottom of this pan must have a minimum of diameter according to the
corresponding cooking zone.
To obtain the best efficiency of your hob, please place the pan well in the centre of the cooking
zone.