Filter
Top Products
EN
1
1
11
ELECTRICAL CONNECTION
• Remove the cover from the Field Wiring Compartment with a
phillips screwdriver.
• Feed the Power Supply Cable through the electrical knockout.
Connect the Power Supply Cable to the range- hood cable. At-
tach the Power Supply Cable grounding lead to the green screw
provided. Attach the White lead of the power supply to the
White lead of the rangehood with a twist-on type wire connec-
tor. Attach the Black lead of the power supply to the Black
lead of the rangehood with a twist-on type wire connector.
• Replace the cover.
10.Insert the screw through the support and thread into the hood liner holes. Tighten screw se-
curely.
11.Reconnect the power and Reinstall filters.
12.Install the damper 10 ø 6” and fix the duct in position using sufficient pipe clamps (not sup-
plied).
10
Power supply cable
Green
Ground
screw
Ground wire