Filter
Top Products
EN
1
0
10
4.Drill at 1”1/4 hole at location shown for electrical wiring.
HOOD size A
36” 14” 3/16
48” 20” 1/4
6. Remove the filters one at a time holding them up with one hand and pulling the handle
downwards with the other hand at the same time.
7.Disconnect power
8. Remove the terminal box cover located behind the right hand filter.
9. Install UL or CSA listed strain relief in hood so that screws can be tightened.
A
2”
Centerline of hood
Hood support
(front view)
Knockout location
on wall