Franklin Industries, L.L.C. FIM90 Ice Maker User Manual


 
it is your responsibility and obligation to have it replaced with a properly grounded
3-prong wall outlet. The ice maker should always be plugged into its own individual
electrical outlet which has a voltage rating that matches the rating label on the appliance.
This provides the best performance and also prevents overloading house wiring circuits
which could cause a fire hazard from overheated wires. Never unplug your ice maker by
pulling on the power cord. Always grip the plug firmly and pull straight out from the
outlet. Repair or replace immediately all power cords that have become frayed or
otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its
length or at either end. When moving the ice maker, be careful not to damage the power
cord.
Extension Cord
Because of potential safety hazards under certain conditions, it is strongly recommended
that you do not use an extension cord with this ice maker.
Technical Information
Model FIM70 FIM90 FIM120
Rated power
115VAC ~ 60Hz ~
470W
115VAC ~ 60Hz ~
520W
115VAC ~ 60Hz ~
580W
Ice-making rated current 6.7A 7.3A 7.5A
Ice-harvest rated current 11.2A 11.7A 11.8A
Refrigerant R134a, 6.88 oz. R134a, 8.96 oz. R134a, 9.92 oz.
High side pressure 320 psi 320 psi 320 psi
Low side pressure 120 psi 120 psi 120 psi
Width x depth x height 16.5x21.3x32.5 22.1x21.3x32.5 22.1x21.3x32.5
Unit weight 91 lbs 106 lbs 102 lbs
Ice-making capacity Up to 65 lbs/day* Up to 83 lbs/day* Up to 110 lbs/day*
The technical data and performance index listed above should be used for reference only.
They are subject to change.
* The actual quantity of ice produced per day can vary with room and water conditions.
5