Filter
Top Products
Operating Instructions
Getting Started
1. Load dishwasher (See Preparing and Loading
Dishes).
2. Add detergent (See Dishwasher Dispenser &
Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Turn dial clockwise to select cycle (See Wash
Cycle Selections).
5. Select desired energy OPTIONS (See Energy
Options).
6. Run hot water faucet nearest dishwasher until
water is hot. Turn water off.
7. To start, close door to latch.
Wash Cycle Selections
Note: Not all cycles available on all models.
Pots & Pans
For pots, pans, casseroles and dinnerware with
dried-on or baked-on soils:
• Turn dial to POTS & PANS.
• Select desired OPTIONS.
Normal Wash
For regularly soiled dishes and silverware:
• Turn dial to NORMAL WASH.
• Select desired OPTIONS.
Plate Warmer
For warming dishes and serving plates before
serving hot foods.
• Load clean plates and dishes to be warmed.
• Turn dial to PLATE WARMER.
• Select HOT DRY option.
Energy Options
Hot Dry Option
HOT DRY option provides faster drying since the
heating element is on during the drying portion of
the cycle.
Cool Dry Option
COOL DRY option saves electricity since the
heating element is off during the drying portion of
the cycle. To speed drying process, open the door
slightly after the cycle is complete.
Some water droplets may remain on door and tub
and in areas where dishes touch silverware basket
and rack.
With either option, you may see water vapor
coming from vent during drying portion of cycle.
The drying option may be changed at any time
during the cycle and affects only the drying period.
Light Wash
For lightly soiled or pre-rinsed dishes and
silverware:
• Turn dial to LIGHT WASH.
• Select desired OPTIONS.
Rinse/Hold
For rinsing dishes that will be washed later:
• DO NOT USE detergent.
• Turn dial to RINSE/HOLD.