Filter
Top Products
28
SETTING OVEN CONTROLS
Probe (cont’d)
"Probe Too Hot" message:
If the message "Prob" ... "Too"... "Hot" ... flashes in the
display, the probe sensor temperature has exceeded 250°F
(121°C). If the probe is not removed, this message may
continue until the sensor reaches 300°F (149°C) or higher,
at which time the oven will turn OFF and display "Prob
ERR" message.
This message may occur if the probe sensor is exposed to
direct oven heat or the food internal temperature is over
250°F (121°C). Be sure the probe sensor is fully inserted
into food. If the food is done, press cancel and remove
food and probe from the oven.
If the error message "Prob ERR" displays, check to be sure
the probe connector is fully inserted into the receptacle. If
the probe is fully inserted in the receptacle and the error
message continues, the probe may need to be replaced.
If "Prob ERR" displays, the oven control will deactivate all
other features until corrected or the probe is removed. If
the error message continues, remove the probe from the
receptacle and oven.
Probe error message: