Filter
Top Products
33
To Set the Sabbath Feature (cont’d)
What to do during a power failure or power
interruption after the Sabbath feature was
activated:
Should you experience a power failure or interruption, the
oven will shut off. When power is restored the oven will not
turn back on automatically. The control will remember that
it is set for the Sabbath and the oven display will show the
message “SF” for Sabbath failure (Fig. 1).
To turn off the oven but keep the Sabbath feature
active:
Press cancel.
To turn off the Sabbath feature:
Press and hold both the +
bake time and delay start pads
for at least 3 seconds. The control
will beep and SAb will disappear
from the display. The oven is no
longer programmed for the
Sabbath feature.
After the Sabbath observance, turn OFF the Sabbath
feature. At the same time press and hold both the
+ pads for at least 3 seconds.
SF will disappear from the display and the oven may be
used with all normal functions.
Fig. 1
• If a delay start time longer than 12 hours (maximum of
24 hours) in advance is desired, set the display mode
for the 24 hour setting. For detailed instructions see
the section “Setting 12 or 24 hour display modes”.
• It is not advised to attempt to activate any other
program feature except BAKE while the Sabbath
feature is active. ONLY the following key pads will
function correctly with the Sabbath feature: 0-9
number pads, bake, start & cancel. NO OTHER
KEYS can be used once the Sabbath feature is
activated. The cooktop will also be inactive.
• You may change the oven temperature once baking
has started. Press bake , enter the oven temperature
change (170 to 500F°) and press start. Remember that
the oven control will no longer beep or display
any changes once the oven is set for the Sabbath
feature.
• If the keep warm feature was activated and the
Sabbath feature was set, the keep warm feature will
automatically shut-off the oven after 3 hours.
NOTES
SETTING OVEN CONTROLS