Filter
Top Products
19
TIMED
DOORDOOR
DELAY
LOCKEDLOCKED
TIMER
CLEAN
CONVCONV
ROASTROAST
BAKE
WARM
BROILBROIL
PROBEPROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOORDOOR
DELAY
LOCKEDLOCKED
TIMER
CLEAN
CONVCONV
ROASTROAST
BAKE
WARM
BROILBROIL
PROBEPROBE
To adjust the oven temperature higher
1. Press
Bake
for 6 seconds. 0° will appear in the display (Figure 1).
2. To increase the temperature use the number pads to enter the
desired change. (Example 30°F)
3
0
(Figure 2). The
temperature may be increased by as much as 35°F (19°C).
3. Press
START
to accept the temperature change and the display
will return to the time of day (Figure 3). Press
Clear
/Off
to reject the
change if necessary.
To adjust the oven temperature lower
1. Press
Bake
for 6 seconds. 0° will appear in the display (Figure 4).
2. To decrease the temperature use the number pads to enter the
desired change. (Example -30°F)
3
0
and then press
Clean
(Figure 5). The temperature may be decreased by as
much as 35°F (19°C).
3. Press
START
to accept the temperature change and the display
will return to the time of day (Figure 6). Press
Clear
/Off
Clear
/Off
to reject the
change if necessary.
INSTRUCTIONS PRESS DISPLAY
Adjusting Oven Temperature
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature or the
Broil temperature .
The temperature in the oven has been pre-set at the factory. When first using the oven, be
sure to follow recipe times and temperatures. If you think the oven is cooking too hot or
too cool for the temperature you select, you can adjust the actual oven temperature to be
more or less than what is displayed. Before adjusting, test a recipe by using a temperature
setting that is higher or lower than the recommended temperature. The baking results
should help you to decide how much of an adjustment is needed.
Bake
3
0
START
or
Clear
/Off
Bake
3
0
Clean
START
or
Clear
/Off
Clear
/Off
To Set the Oven Control Back To The Factory Default Settings
This function allows you to reset the user defined settings back to the original settings. These include 12 or 24 Hour
Time of Day Display, Continuous Control Operation or 12 Hour Energy Saving mode, Silent Control Operation or
Normal Sounds, Fahrenheit or Celsius Temperature Display, Oven Temperature Adjustment (set back to 0).
1. Press and hold
7
until the first single beep sounds (about 6 seconds)
2. After the first beep, press
START
pad once. All the setting are now set to the original factory default.