Filter
Top Products
23
SETTING OVEN CONTROLS
NOTE
If a 2 or 4 hour clean time is desired, press SELF CLEAN
multiple times to toggle between 2, 3 or 4 hours.
NOTE
If a 2 or 4 hour clean time is desired, press SELF CLEAN
multiple times to toggle between 2, 3 or 4 hours.
NOTE
Allow about 15 seconds for the oven door lock to close.
The SELF CLEAN pad controls the Self-Cleaning feature. If
you are planning to use the oven directly after a self-clean
cycle remember to allow time for the oven to cool down
and the oven door to unlock. This normally takes about one
hour. So a 3 hour self-clean cycle will actually take about
4 hours to complete.
*It is recommend to use a 2 hour self-clean cycle for light
soils, a 3 hour cycle for , and a 4 hour cycle
for (to assure satisfactory results).
to start immediately and shut off automatically
1. Be sure the clock is set with the correct time of day and
the oven door is closed.
2. Press SELF CLEAN. “DOOR” will ash. and CLn
will show in the display. The control will automatically
clean for a 3 hour period (default self-cleaning cycle
time). For the rst 10 seconds, “” will
ash and beep to remind you that the racks need to be
removed.
3. Press START. The “DOOR” icon will ash; “CLEAN”
and the letters “CLn” will remain on in the display.
4. As soon as the control is set, the motor driven oven
door lock will begin to close automatically. Once the
door has been locked the “DOOR” indicator light will
stop ashing and remain on and the
icon will appear.
Also, the oven icon will appear in the display.
1. “HOT” will appear in the display. The time of day, the
“DOOR” and
icon will remain in the display.
2. Once the oven has cooled down for approximately 1
HOUR, and the “DOOR” is no longer displayed, the
oven door can then be opened.
If it becomes necessary to stop or interrupt a self-cleaning
cycle due to excessive smoke or re in the oven:
1. Press CANCEL.
2. The oven door can only be opened after the oven has
cooled down for approximately 1 HOUR and the “DOOR”
and icons are no longer displayed.
CYCLE
The SELF CLEAN and DELAY START pads controls the
Delayed Self-Clean operation. The automatic timer will turn
the oven on and off at the time you select in advance.
start at a delayed time and shut off automatically
1. Be sure the clock is set with the correct time of day and
the oven door is closed.
2. Press SELF CLEAN. and CLn will show in the
display. The control will automatically clean for a 3 hour
period. For the rst 10 seconds, “” will
ash and beep to remind you that the racks need to be
removed.
3. Press START. The “DOOR” icon will ash; “CLEAN”,
and the letters “CLn” will remain on in the display.
4. As soon as the control is set, the motor driven oven
door lock will begin to close automatically. Once the door
has been locked the “DOOR” indicator light will quit
ashing and remain on and the
icon will appear.
5. Press DELAY START. Enter the desired start time using
the number pads .
6. Press START. “DELAY”, “ ” and
“CLEAN” icons will remain on.
7. The control will start the self-cleaning at the set start
time, for the period of time previously selected. At that
time, the icon “DELAY” will go out; “CLn” and oven
icon will appear in the display.
1. “HOT” will appear in the display. The time of day, the
“DOOR” and icon will remain in the display.
2. Once the oven has cooled down for approximately 1
HOUR, and the “DOOR” is no longer displayed, the
oven door can then be opened.
If it becomes necessary to stop or interrupt a self-cleaning
cycle due to excessive smoke or re in the oven:
1. Press CANCEL.
2. The oven door can only be opened after the oven has
cooled down for approximately 1 HOUR and the “DOOR”
and icons are no longer displayed.