Filter
Top Products
10
SETTING OVEN CONTROLS
The pad controls normal baking. The oven can be
programmed to bake at any temperature from 170°F to
550°F.
Baking Tips:
• Preheat your oven before using the bake mode.
• During preheat, the 2 elements and the convection fan
are used in cycle to quickly heat the oven.
• Use only one rack and center the pans as much as pos-
sible on rack 2 or 3.
• If using two racks, place the oven racks in positions 2
and 4.
• Allow 2” to 4” (5,1 to 10,2cm) around the utensil(s) for
proper air circulation.
• Be sure the pans do not touch each other, the door,
sides or back of the oven.
To Set the Controls for Baking:
1. Press . “— — —” appears in the display.
2. Within 5 seconds, press the or . The display
will show “350°F (177°C)”. By pressing and holding
the or , the temperature can then be adjusted
in 5°F increments (1°C if the control is set to display
Celsius).
3. 7 seconds after the or pad is released, the
oven will begin heating to the selected temperature.
When the displayed temperature reaches the desired
baking temperature, the preheat indicator light will
turn OFF and the control will beep.
NOTE
Pressing CANCEL will stop the feature at any time.
Started:
1. Press .
2. Press the
or pad to increase or decrease the
set temperature.