Frigidaire 4400 Series Dishwasher User Manual


 
7
Notes:
The dishwasher will not
operate correctly if the
wash arm is not aligned
with one of the water inlet
holes on back wall of the
dishwasher.
The left and right side
adjusters on the racks
must both be fully in the upward or downward
position for proper connection.
Preparing and Loading Dishes (continued)
Adjustable Upper Rack
The adjustable upper rack can be raised or
lowered to accommodate taller plates, platters,
pans, etc. optimizing usable space in both upper
and lower racks. Full-size dinner plates can be
loaded in the upper rack if it is in the lower position.
Always adjust the upper rack before loading.
To lower the rack:
1. Pull the rack fully out.
2. Place thumbs on each lever on the adjuster
while holding rack with both hands.
3. Press down on the levers with thumbs and
push rack down. The rack will come to a stop
when it is in position.
To raise the rack:
1. Pull the rack fully out.
2. Place hands on both sides and lift up until
rack comes to a stop and latches in place.
Removing the upper rack
The rack can be removed when tall or oversized
items need to be loaded into the lower rack.
Unload the rack before removing it from the
dishwasher.
To remove rack with tab-lock rack stops:
1. Roll the rack 1 ⁄ 3 to 1 ⁄ 2 of the way out.
2. Locate the rack stops at the end of each
track. Squeeze the tab in the middle of the
rack stop and pull the rack stop straight out.
Take care to support the rack while removing
the rack stops.
3. Roll the rack all the way out of the track and
remove from the dishwasher.
To replace:
1. Replace the dishwasher rack by guiding the
wheels into the tracks.
2. Push each rack stop squarely into the end of
the track until the catch pops into the small
hole on the side of the track.