6
Operating Instructions
(continued)
Preparing and Loading
Dishes
Dish Preparation
Scrape away large pieces of food, bones, pits,
toothpicks, etc. The continuous filtered wash
system will remove remaining food particles.
Burned-on foods should be loosened before
loading. Empty liquids from glasses and cups.
Foods such as mustard, mayonnaise, vinegar,
lemon juice and tomato based products may
cause discoloration of stainless steel and
plastics if allowed to sit for a long period of
time. Unless the dishwasher is to be operated
at once, it is best to rinse off these food soils.
Load racks so that large items do not
prevent the detergent dispenser from
opening.
Check manufacturer's recommendations
before washing items in question.
If the dishwasher drains into a food
disposer, be sure disposer is completely
empty before starting dishwasher.
Status Indicator Lights
When the ADD-A-DISH light is on, you can
add additional items.
The WASHING light comes on at the
beginning of cycle and remains on until the
end of the main wash.
The RINSING light will come on and remain
on during the last two rinses of all cycles.
The DRYING light indicates the drying portion
of the cycle. The light will come on when
either drying option is selected.
The CLEAN light will come on at end of cycle
and remain on until door is opened.
Child Lock Controls
To prevent children from accidentally
changing the dishwasher cycle or starting the
dishwasher, lock the dishwasher controls by
touching the NO HEAT DRY pad for 3
seconds. The CONTROLS light will come on
and no new selections can be made until the
lock is released. To unlock the controls, touch
the NO HEAT DRY pad for 3 seconds until the
light goes out.
Electrical Power Interruption
When first installed or when power has been
interrupted, HI-TEMP WASH and NO HEAT
DRY status lights will flash. To clear, press
START/CANCEL pad. If power failure occurs
during a cycle, it will be necessary to restart
the dishwasher by resetting the cycle you
want.
To Cancel a Cycle
You can cancel a cycle anytime during the
cycle. Press START/CANCEL pad and the
dishwasher will start a 90 second drain. At the
end of the drain, select the desired cycle.