Filter
Top Products
2
Oven
Four
Preheat
Préchauffage
Door Locked
PorteVerrouillée
Bake
Cuire
Broil
Griller
Timer
On/Off
Minuterie
Clock
Horloge
Bake time
Temps de
cuisson
Start time
Heure de
départ
Clear/Off
Annuler
Clean
Nettoyer
Nettoyage
Speed
clean
Speed Bake Oven
Four à Cuisso n Rapide
Speed bake
Cuisson
rapide
Keep w arm
Garder
chaud
ELECTRONIC OVEN CONTROL
Control Pad Functions (Model B)
Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the
various functions of the oven as described below. Note: The graphics on your timer may not look exactly like the one
shown. This doesn't change the way it operates.
Note: The oven function will not work if the time of day clock is not set.
The oven can be programmed to:
Bake normally, Keep warm, Time Bake, Delayed Timed Bake (delayed start), Broil and Clean.
Note: Push buttons or pads may be shaped differently.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent
operation.
To tell if your oven is set for normal or silent operation push and hold DELAY START or START TIME pad for 7 seconds. "- -"
or "SP" appears in the display. Within 5 seconds, press the UP or DOWN ARROW pad to switch between normal sound operation
and silent operation mode. The display will show either "- -" or "SP". Wait 5 seconds to return to normal operating mode.
Note: If "SP" appears, the control will operate with normal sounds and beeps. If "- -" appears, the control is in the silent operation
mode.
Temperature Conversion (Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press and hold BROIL pad for 7 seconds until °F or °C appears in the display.
2. Press the UP or DOWN ARROW pad to change °F to °C or °C to °F.
3. Wait 5 seconds to accept the changes or press STOP or CLEAR/OFF pad to accept the changes.
Bake Pad
Used to enter
the normal
baking mode
temperature.
Broil Pad- Used to
select the variable
broil function.
Clean Pad Used
to select the self-
cleaning cycle.
Clear Off Pad- Used
to clear any function
previously entered
except the time of
day and minute
timer. Push Clear
pad to stop
cooking.
Up and Down arrow pads- Used
along with the function pads to select
oven temperature, cooking time, start
time (when programming an automatic
start time), time of day, clean time and
minute timer.
Clock Pad- Used to set
the time of day.
Bake Time
Pad- Used to
enter the length
of the baking
time.
Start Time Pad- Used to
set the desired start time
for baking. Can be used
with BAKE TIME to
program a delayed bake
cycle.
Oven, Preheat & Lock lights- The "oven" light indicates that
the oven is working. The "Preheat" light will glow when the oven
is first set to operate, or if the desired temperature is reset higher
than the actual oven temperature. The "Door Locked" light will
flash until the door locks when the self-clean cycle is in use. It
glows constantly after the door locks (some models).
Oven
Interior Light
Pad- Used to
turn oven
interior light
ON and OFF.
Keep Warm Pad-
Used to set the
Keep Warm
feature.
Speed Bake
Pad Used to
enter the speed
bake mode
temperature.
Feature
indicator lights-
These light show
which feature is
in use.
Speed Clean
Pad Used to
select the
Speed Clean
cycle.
Timer Pad- Used to
set or cancel the
minute timer. The
minute timer does
not start or stop
cooking.