Frigidaire FFET2725LS Oven User Manual


 
8
SETTING OVEN CONTROLS
Control Pad Features
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each feature
and function follow later in this Use & Care Guide. The graphics on your timer may not look exactly like the one
shown. This doesn’t change the way it operates.
1. Bake Pad— Used to enter the normal baking mode
temperature.
2. Broil Pad—Used to select the variable broil function.
3. Clean Pad—Used to select the self-cleaning cycle.
4. Keep warm Pad— Used to set the Keep Warm
feature.
5. Bake time Pad— Used to enter the length of the
baking time.
6. Start time Pad— Used to set the desired start
time for baking. Can be used with BAKE TIME to
program a delayed bake cycle.
7. Clear off Pad— Used to clear any function
previously entered except the time of day and minute
timer. Push Clear off pad to stop cooking.
8. Start on
Used to start all oven functions. Not used
with Oven Light.
9. Oven Interior Light Pad— Used to turn oven
interior light ON and OFF.
10. Clock Pad— Used to set the time of day.
11. Down arrow pad—Used along with the function
pads to select oven temperature, time of day and
minute timer.
12. Up arrow pad—Used along with the function pads to
select oven temperature, time of day and minute timer.
13. Timer OnOff Pad— Used to set or cancel the
minute timer. The minute timer does not start or stop
cooking.
NOTE
All instructions are given for the UPPER oven. If LOWER oven is used the indicator lights will appear in the right
portion of the display.
NOTE
If “SP” appears, the control will operate with normal
sounds and beeps. If “- -” appears, the control is in the
silent operation mode.
Setting Silent Control Operation
The Start time pad controls the Silent Control Operation
feature. The Silent Control Operation feature allows the
oven control to be operated without sounds or beeps
whenever necessary. If desired the control can be
programmed for silent operation and later returned to
operating with all the normal sounds and beeps.
To change control from normal sound operation to
silent control operation
1. Press and hold Start time pad for 6 seconds. A beep
will sound, "-- --" will appear, "UPPER" and "DELAY"
will ash in the display. After 6 seconds, a beep will
sound and "SP" will appear in the display.
2. Press Up or Down arrow pad to switch between
normal sound operation and silent operation mode.
3. Press Start pad or wait 5 seconds to accept the
change. Press Clear off pad to reject the change.