Frigidaire FFET2725LS Oven User Manual


 
9
SETTING OVEN CONTROLS
NOTE
Both ovens will be changed at the same time.
NOTE
If “F” appears, the display is set to show temperatures
in Fahrenheit. If “C” appears, the display is set to show
temperatures in Celsius.
NOTE
12h” in the display indicates the control is set for the
12 Hour Energy Saving mode and “- -h” indicates the
control is set for the Continuous Bake feature.
Temperature Display (Fahrenheit or Celsius)
The Broil pad controls the Fahrenheit or Celsius
temperature display modes. The oven control can be
programmed to display temperatures in Fahrenheit or
Celsius. The oven has been preset at the factory to
display in Fahrenheit.
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. Press Broil pad and hold for 6 seconds. A beep will
sound, “---” will appear “UPPER” and “BROIL” will
ash in the display. After 6 seconds a beep will be
heard and “F” or “C” will appear in the display.
2. Press Up or Down arrow pad to switch between
Fahrenheit or Celsius display modes. The display will
show either “F” or “C”.
3. Press Start pad or wait 5 seconds to accept the
change. Press Clear off pad to reject the change.
Setting the Clock
The Clock pad is used to set the clock. The clock may
be set for 12 or 24 hour time of day operation. The clock
has been preset at the factory for the 12 hour operation.
When the wall oven is rst plugged in, or when the power
supply to the appliance has been interrupted, the timer in
the display will ash. Some models will also display “PF
(power failure).
When PF appears in the display or when 12:00 is ashing,
press Clear off pad.
To set the clock
1. Press Clock pad. “CLO” and the current time of day
will appear in the display.
2. Press Up or Down arrow pad to set the correct time
of day. Press Start pad. The new time of day will
appear in the display.
Changing Between 12 or 24 Hour Time of
Day Display
1. Press and hold Clock pad for 6 seconds. “CLO” and the
current time of day will appear in the display. A beep will
sound and “12h” or “24h” will appear in the display.
2. Press Up or Down arrow pad to switch between the
12 and 24 hour time of day display. The display will
show either “12h” or “24h”.
3. Press Start pad or wait 5 seconds to accept the
change. Press Clear off pad to reject the change.
4. Reset the correct time as described in To set the Clock
above. Please note that if the 24 hour time of day
mode was chosen, the clock will now display time from
0:00 through 23:59 hours.
Setting Continuous Bake or 12 Hour
Energy Saving
The Timer on•off and Clean pads control the
Continuous Bake or 12 Hour Energy Saving Features. The
oven control has a factory preset built-in 12 Hour Energy
Saving feature that will shut off the oven if the oven
control is left on for more than 11 hours and 59 minutes.
The oven can be programmed to override this feature for
Continuous Baking.
To set the control for Continuous Bake or 12 Hour
Energy Saving Features
1. Press and hold Timer on•off pad for 6 seconds. After
6 seconds “12h” or “- -h” will appear in the display
and the control will beep once.
2. Press Up or Down arrow pad to switch between the
12 Hour Energy Saving and continuous bake features.
3. Press Start pad or wait 5 seconds to accept the
change (display will return to time of day). Press Clear
off pad to reject the change.
Setting Timer
The Timer on•off pad controls the Timer feature. The
Timer serves as an extra timer in the kitchen that will
beep when the set time has run out. It does not start or
stop cooking. The Timer feature can be used during any
of the other oven control functions, except during a self
clean operation.
To set the Timer
1. Press Timer on•off pad. “-- --” will appear and
TIMER” will ash in the display.
2. Press Up or Down arrow pad to set the desired time
in the display. Press Start pad or wait 5 seconds. The
time will begin to countdown with the set time and
TIMER” will stay in the display.
3. When the set time has run out, “End” and “TIMER
will show in the display. The clock will sound with 3
beeps every 7 seconds until Timer on•off pad is
pressed.
To cancel the Kitchen Timer before the set time
has run out: Press Timer on•off pad. The display will
return to the time of day.