Filter
Top Products
15
NOTE
The oven temperature adjustments made with this feature
will not change the Self-Clean cycle temperature.
NOTE
The kitchen area should be well ventilated using an
open window, ventilation fan or exhaust hood during
the Self-Clean cycle. This will help eliminate the normal
odors associated with the Self-cleaning cycles.
NOTE
If you do not want to start a Delayed Self-Clean Cycle,
skips steps 2 & 3.
NOTE
When the oven is cool, wipe away any residue or
powdered ash with a damp cloth or paper towel.
SELF-CLEANING
To Set the Controls for a Self-Clean (3 hours) or a
Delayed Start Self-Clean (3 hours):
Self-Clean Cycle
1. Be sure the clock shows the correct time of day.
2. Press the START TIME pad.
3. Press and hold the UP ARROW pad to scroll to the
time to start the delayed Self-Clean cycle. Release
the pad when the desired time is displayed.
4. Press the CLEAN pad. "- -" appears in the display.
5. Press the UP ARROW pad once.
As soon as the controls are set, the motor driven
lock will begin to close automatically and the “Door
Locked” indicator light will fl ash. DO NOT open the
oven door while the light is fl ashing (it takes about
15 seconds for the oven door to lock).
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a Self-
Cleaning cycle:
1. Press the CLEAR/OFF pad.
2. Once the oven has cooled down for about 1 HOUR
and the "Door Lock" light has gone out, the oven
door can be opened.
3. Restart the Self-Clean cycle once all conditions have
been corrected.
6. "CLn" will appear in the display during the Self-Clean
cycle and the "Door Locked" light will glow until the
Self-Cleaning cycle is complete or cancelled and the
oven temperature has cooled.
When the Self-Clean Cycle is Completed:
1. “CLn” will appear in the display and "Door Locked"
light will continue to glow.
2. Once the oven has cooled down for about 1 HOUR
and the "Door Locked" light has gone out, the oven
door can be opened.
ADJUSTING THE OVEN TEMPERATURE
Your oven thermostat has been precisely set at the factory.
This setting may differ from your previous oven, however, so
your recipe times may not give you the results you expect.
If you think that the oven is cooking too hot or cool for your
recipe times, you can adjust the thermostat so that the oven
cooks hotter or cooler than the temperature displayed.
To Adjust Oven Temperature:
1. Press and hold the BAKE pad for 8 seconds. The
display now indicates the amount of degrees offset
between the original factory temperature setting and
the current temperature setting. If the oven control
has the original factory calibration, the display will
read “0”.
2. The temperature can now be adjusted up or down
35°F or 19°C, in 1°F or 1°C steps by pushing and
holding the UP or DOWN ARROW pad. Adjust until
the desired amount of degrees offset appears in
the display. When lowering the oven temperature,
a minus sign (-) will appear before the number to
indicate that the oven will be cooler by the displayed
amount of degrees.
3. When you have made the desired adjustment, wait 5
seconds or press CLEAR/OFF to accept the change.