Filter
Top Products
3
Attach front mounting brackets
Attach rear mounting brackets
DRAWER
1 - Appliance 2 - Side panel style of your appliance 3 - Rear bracket orientation
DRYER
3 indents on side.
Rear brackets from •
GREEN kit
Tab A into•
Slot 1•
Arrow pointing to •
back
DRYER
2 indents on
side and 4 inch
knockout for side
venting.
Rear brackets from •
GREEN kit
Tab B into•
Slot 3•
Arrow pointing to •
front
WASHER
3 indents on side.
Rear brackets from •
GREEN kit
Tab A into•
Slot 2•
Arrow pointing to •
back
WASHER
3 indents on side
in shape of “lOl”.
Rear brackets from •
GREEN kit
Tab A into•
Slot 1•
Arrow pointing to •
front
TAB A
TAB B
DIRECTION
INDICATOR
ARROWS
Attach each front clip to outer-most 1.
set of holes with 2 screws.
Determine your appliance type (washer or dryer) and style of side panel ac-1.
cording to columns 1 and 2 in table below.
Orient rear brackets according to column 3 for your particular model.2.
Attach each bracket with 2 screws through the holes that line up on pedestal.3.
Each rear bracket has tabs marked “A” and “B”.•
Each pedestal has slots in the rear marked “1”, “2” •
and “3”.
Each rear bracket also has 2 arrows indicating •
bracket direction when mounted on the pedestal.
Front brackets from
GREEN kit.
SLOT 1
SLOT 2
SLOT 3