10
BEFORE OPERATING
• Before operating your new oven make sure you read
and understand this Use and Care Guide completely.
• Before the Over the Range Microwave Oven can be used,
follow these procedures:
1. Plug in the oven. Close the door. The oven display will
show ENJOY YOUR OVEN PRESS CLEAR.
2. Press the STOP clear pad.
:
will appear.
3. Set clock. See below.
To Set the Clock
• Suppose you want to enter the correct time of day 12:30
(A.M or P.M.).
Step Press
1. Press the user pref pad.
user
pref
2. Press number 5.
5
3. Enter the correct time of day
by pressing the
numbers in sequence.
12
30
4. Press the START enter pad.
START
enter
This is a 12 hour clock. If you attempt to enter an incorrect
clock time, ERROR will appear in the display. Press the
STOP clear pad and re-set the clock.
• If the electrical power supply to your microwave oven
should be interrupted, the display will intermittently
show after the power is reinstated. If this occurs during
cooking, the program will be erased. The time of day
will also be erased. Simply press STOP clear pad and
reset the clock for the correct time of day.
NOTE
Your Over the Range Microwave Oven can be programmed
with the door open except for Add 30 sec., Popcorn,
Veggies, Baked Potato and Sensor Reheat.
STOP clear
Press the STOP clear to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, press twice.
U&C 2.0 bottom control_UL [B321]10 10U&C 2.0 bottom control_UL [B321]10 10 1/31/12 4:00:19 PM1/31/12 4:00:19 PM