14
Door Handle Mounting Instructions for
Frigidaire Professional
®
1. Remove handles from carton and any other protective packaging.
2. Position fresh food handle end over upper and lower pre-installed shoulder bolts (A)
that are fastened into door, ensuring the holes for the set screws are facing towards the
opposite door.
3. Whileholdinghandlermlyagainstdoor,fastenupperandlowerAllensetscrews(B)
with supplied Allen wrench.
4. Repeat steps 2 and 3 to install opposite handle. Ensure the holes for the set screws are
facingtowardstherstdoor.
5. Position freezer handle end over left and right pre-installed handle mounts that are
fastened to the door, ensuring the holes for the set screws are facing down.
6. Whileholdinghandlermlyagainstdoor,looselytightenfarrightAllensetscrew(B)withsupplied
Allen wrench until there is no gap between handle and door.
7. Stillholdingthehandlermlytothedoor,rmlytightenfarleftAllensetscrew(B)withsupplied
Allen wrench.
8. ReturntothefarrightAllensetscrew(B)andrmlytightenwithsuppliedAllenwrench.
9. Firmly tighten the inside Allen set screws.
INSTALLING DOOR HANDLES
Mounting Freezer Handle
CAUTION
Wear gloves and safety goggles. Use extreme CAUTION when installing these handles.