Filter
Top Products
5
NOTE
The direction in which your
refrigerator doors open (door swing)
can be reversed, from left to right
or right to left, by moving the door
hinges from one side to the other.
Reversing the door swing should be
performedbyaqualiedperson.
DOOR REMOVAL INSTRUCTIONS
Top Hinge
Cover Front
Screw
Top Hinge
Cover Rear
Screw
Bottom
Hinge
Screw
Top
Hinge
Screw
Door removal and reversal instructions:
1. Remove toe grille.
2. Remove top hinge cover. Trace around the hinge with a soft
lead pencil. This makes reinstallation easier. Remove top
hinge and lift door off center hinge pin. Set door aside.
3. Unscrew center hinge pin using adjustable wrench and save
for reassembly. Ensure plastic washer stays on hinge pin.
4. Lift refrigerator door off of bottom hinge and set aside.
5. Remove center hinge and shim by removing inside screw
and loosening two outside screws enough to allow hinge
and shim to slide out. Tighten screws.
6. Loosen two outside screws on opposite side of refrigerator,
remove inside screw and install center hinge.
7. Removetwoscrewsonbottomhingewith⅜”socketwrench.
8. Install bottom hinge on opposite side with the two screws
removed from step 7.
9. Unscrew bottom hinge pin using adjustable wrench. Move hinge
pin to other hole in hinge and tighten with adjustable wrench.
10. Reverse door handles (see instruction on next page).
11. Move freezer and refrigerator door stops to opposite side.
Before starting screws, use an awl to puncture the foam.
12. Position refrigerator door onto bottom hinge pin and screw
center hinge pin through center hinge into top of door. Close
refrigerator door to help align hinge hole.
13. Tighten center hinge pin with adjustable wrench.
14. Remove cabinet and hinge hole plugs and move to opposite side.
15. Lower freezer door onto center hinge pin.
16. Close freezer door. Have an assistant lift up on opposite side
of door while tightening screws to install top hinge.
17. Flip toe grille and reinstall.
18. Plug in electrical power cord and turn refrigerator temperature
control to center position. Adjust setting as necessary.
IMPORTANT
Before you begin, turn the
refrigerator temperature control to
“0” and remove the electrical power
cord from the wall outlet. Remove
any food from door shelves.
Door
Stop
Shim
Washer
Hinge
Pin
Center
Hinge
Screws
Hinge
Hole
Plug
Handle
Hole
Plug
Door
Stop
Screw
Washer
Hinge
Pin
Bottom
Hinge
Screws
Toe
Grille
Door Stop
Screw
Door
Stop
Top
Hinge
Cover
Top
Hinge
Adjustable
Wrench
Socket
Wrench Set
3/8" Fixed
Wrench
Tools Necessary:
Phillips
TM
Head
oror