Frigidaire FPHI2188PF Freezer User Manual


 
13
Care & Cleaning Tips
Part What To Use Tips and Precautions
Interior &
Door Liners
• Soap and water
• Baking soda and water
Use2tablespoonsofbakingsodain1quartofwarmwater.
Be sure to wring excess water out of sponge or cloth before
cleaning around controls, light bulb or any electrical part.
Door
Gaskets
• Soap and water Wipe gaskets with a clean soft cloth.
Drawers &
Bins
• Soap and water Use a soft cloth to clean drawer runners and tracks.
Glass
Shelves
• Soap and water
• Glass cleaner
• Mildliquidsprays
Allow glass to warm to room temperature before immersing
in warm water.
Toe Grille • Soap and water
• Mildliquidsprays
• Vacuum attachment
Vacuum dust from front of toe grille. Remove toe grille (see
Installation Instructions). Vacuum backside, wipe with sudsy
cloth or sponge. Rinse and dry.
Exterior &
Handles
• Soap and water
• Non Abrasive Glass
Cleaner
Do not use commercial household cleaners containing
ammonia, bleach or alcohol to clean handles. Use a soft
cloth to clean smooth handles. DO NOT use a dry cloth to
clean smooth doors.
Exterior &
Handles
(Stainless
Steel Models
Only)
• Soap and water
• Stainless Steel
Cleaners
Never use CHLORIDE or cleaners with bleach to clean
stainless steel.
Clean stainless steel front and handles with non-abrasive
soapy water and a dishcloth. Rinse with clean water and a
soft cloth. Use a non-abrasive stainless steel cleaner. These
cleaners can be purchased at most home improvement or
major department stores. Always follow manufacturer’s
instructions. Do not use household cleaners containing
ammonia or bleach.
NOTE: Always clean, wipe and dry with the grain to prevent
scratching. Wash the rest of the cabinet with warm water
andmildliquiddetergent.Rinsewell,andwipedrywitha
clean soft cloth.
Replacing
Light Bulbs
• Unplug refrigerator
• Wear gloves
• Remove light cover
• Replace old bulb
• Replace light cover
• Plug in the refrigerator
CAUTION: Wear gloves when replacing light bulbs to avoid
getting cut. Use same wattage when replacing bulb
CARE & CLEANING