Frigidaire FPHI2188PF Freezer User Manual


  Open as PDF
of 15
 
9
IMPORTANT
After connecting the water supply, refer to
“How to Prime the Water Supply System” for
important information about priming an empty
water supply system.
Your refrigerator’s water supply system includes
severaltubinglines,awaterlter,awater
valve, and a water tank. To ensure that your
water dispenser works properly, this system
mustbecompletelylledwithwaterwhenyour
refrigeratorisrstconnectedtothehousehold
water supply line.
Figure 1
Figure 2
Steel
Clamp
Stainless
Steel
water Line
Water Valve
Bracket
Valve Inlet
Water Valve
6 ft. Stainless Steel water line
from household water supply
Plastic Water Tubing
to Ice Maker
Fill Tube
Plastic Water
Tubing to Ice
Maker Fill
Tube
Steel
Clamp
Brass
Compression
Nut
Ferrule
(Sleeve)
Copper
water line
Water Valve
Bracket
Valve Inlet
Water Valve
Copper water line
from household
water supply
(Include enough tubing in loop
to allow moving refrigerator out
for cleaning.)
CONNECTING THE WATER SUPPLY
9. To turn ice maker on, lower wire signal arm
(side mounted) or set the ice maker’s On/
Off power switch to the “I” position (rear
mounted).
 previous next