Filter
Top Products
9
NOTE:
Turn blower and lights off. Make sure the lights are cool.Turn blower and lights off. Make sure the lights are cool.
Turn blower and lights off. Make sure the lights are cool.Turn blower and lights off. Make sure the lights are cool.
Turn blower and lights off. Make sure the lights are cool. If new
lights do not operate be sure lights are inserted correctly before calling
service.
• Using a flat head screwdriver or equivalent tool, carefully pry loose the
light cover.
• Remove the damaged light and replace with a new 12 Volt, 20 Watt
(maximum) halogen light made for a G-4 base. Follow package directions
and do not touch new light with bare hands.
• Reinstall the light cover.
Lights replacementLights replacement
Lights replacementLights replacement
Lights replacement
Figure 10Figure 10
Figure 10Figure 10
Figure 10
Figure 10Figure 10
Figure 10Figure 10
Figure 10