Frigidaire 241540100 (1203) Refrigerator User Manual


 
13
Controls & Settings
Choosing Fahrenheit or Centigrade
Depending on which temperature standard you
prefer to use, you can set your control panel to
display in fahrenheit or centigrade. To change
between fahrenheit and centigrade, press the
Mode button (located between the two digital
temperature displays).
Making Temperature Adjustments
After running your refrigerator for 24 hours, you can adjust temperatures as
needed. Make your adjustments small and gradual, allowing time for temperatures
to change and stabilize. Refer to the following guidelines for temperature settings.
What To Do If The Temperature Displays Flash
If ever you you see both temperature displays continuously flashing, it may indicate
that the control system has detected a performance problem. Call your Electrolux
service representative, who can interpret the flashing message.
Temperature Control Range
Freezer Fresh Food
Fahrenheit Centigrade Fahrenheit Centigrade
Warmest
6
°
-14
°
47
°
8
°
Warmer
Factory Setting
Midpoint
0
°
-18
°
37
°
3
°
Coldest
-6
°
-21
°
33
°
1
°
Colder
Press to alternate between
Fahrenheit and Centigrade
Temperature Adjustment Guide
If Fresh Food compartment is too warm
Adjust Fresh Food control one degree
colder by pressing Down Arrow button.
If Fresh Food compartment is too cold
Adjust Fresh Food control one degree
warmer by pressing the
Up Arrow
button.
If Freezer compartment is too warm
Adjust Freezer control one degree colder
by pressing
Down Arrow
button.
If Freezer compartment is too cold
Adjust Freezer control one degree warmer
by pressing the
Up Arrow
button.
241540100_eb_sxs_Use&Care_En.pmd 1/22/2004, 10:33 AM13