Filter
Top Products
FRYMASTER HD1814 SERIES GAS FRYERS
CHAPTER 4: FRYER OPERATIONS
4-3
4.2 Final Preparation
WARNING
NEVER set a complete block of solid shortening on top of heating tubes. To do so
will damage the heating tubes and frypot, and void the warranty.
4.2.1 Filling Fryer with Oil
A. When using oil, fill the fryer to the bottom OIL LEVEL line scribed into the back of the
frypot.
B. When using a solid shortening, cut it into small pieces and pack it below the heat tubes,
between the tubes and on top of the tubes, leaving no air spaces around the tubes. Do not
disturb or bend the probe sensing bulbs.
C. Press the computer on/off switch to "ON".
D. When the frypot is filled and the oil is heated, carefully replace the crumb screen over the
heat tubes. Wear oil-proof insulated gloves to avoid the potential for burn injury when
placing crumb screen in frypot.
For additional computer instructions, see computer manual that came with
frying system.