Filter
Top Products
Cabinet Service Procedures
2-3
USB.
6. Press OK.
7. The master control displays Please Wait… as files are transferred to the flash drive,
changing to the number of files copied when the process is complete.
8. Press OK.
9. Remove flash drive.
10. Cabinet returns to normal display.
Configure Cabinet with Menu/Configuration Captured on another Cabinet
1. Place a flash drive with only a captured
menu/cabinet configuration in the root file
into the USB port of a cabinet to be
identically configured.
2. Press the programming key and enter
090709 with the keypad.
3. Press OK.
4. The master control will display
Reconfigure OK or
Cancel.
5. Press OK.
6. The master control will display Please wait… as the files are updated, changing to the
number of files copied.
7. Press OK.
8. The cabinet will return to the original menu setting, changing row position displays to match
items introduced with the configuration transfer.
Cabinet Access Codes
Code Function
759248 Capture cabinet configuration to flash drive
98765 Load software updates from USB drive
1955 Enter manual programming mode (see operation manual).
4557 LON Works service pin
090809 View software versions
1111 Service test mode
090709 Update language file
A cabinet configuration can be transferred to multiple
cabinets with a captured configuration held on a flash
drive.