Filter
Top Products
2. RANGE HOOD MOUNTING
1
Referring to “SIZE & DIMENSIONS” on
page 5, insert 2 supplied washer head
wood screws into the mounting wall (for
the left and right hangers). Allow about
¼" space between the wall and
screwheads for hanging the body.
2
To mount the range hood, hook the
temporary fixing holes of the hangers on
the screws, slide the body downward,
then tighten the screws.
3
Insert 2 more washer head wood
screws in the holes of the body, and
tighten them firmly.
4
Connect duct and duct joint, then
make the duct joint secure and air tight
using non-flammable tape such as duct
tape, etc. (not supplied)
Duct Tape, etc.
Duct
CAUTION: The range hood is quite heavy (FDR-4200D: 35kg, FDR-
4200: 28kg), so be careful not to injured during mounting
work.
9