Gaggenau 363 Refrigerator User Manual


 
Cutout cabinet
Kitchen
cabinet
Kitchen cabinetry
Door panel
Installation cutout
(created by a separate cutout)
Toe-kick
Countertop
Room
floor
Room
wall
min. 4"
(102)
Custom door
panel
Furniture
return
Installation cutout
(vertical section)
84"
(2134)
24"
(610)
25"
(635)
42"
(1067)
min. 4"
(102)
min. 4"
(102)
Planning example for a side-by-side combination in standard overlay cabinetry.
Cutout for a 42" side-by-side combination
In this example, the installation cutout is formed by creating
a separate cutout around the appliances. It yields a look that
deviates from the general kitchen design.
The custom door panel has a cumulative thickness of 1 ½"
(38 mm), ¾" (19 mm) emulating the face frame and ¾" (19
mm) for the actual door panel). Thus, a 25" (635 mm) deep
installation cutout is required.
cutout width is exactly 42" (for an 18" + 24" = 42"
side-by-side combination)
cutout (case) depth is 25" (635 mm) due to 1 ½"
(38 mm) custom door panel
any furniture return must be at least 4" (102 mm)
deep, on interior top and sides, of solid material
and should be finished to match the exterior at the
same depth (4" or 102 mm)
Cutout cabinet
Kitchen
cabinet
Kitchen cabinetry
Door panel
Installation cutout
(created by a separate cutout)
Toe-kick
Countertop
Room
floor
Room
wall
min. 4"
(102)
Custom door
panel
Furniture
return
Installation cutout
(vertical section)
84"
(2134)
24"
(610)
25"
(635)
42"
(1067)
min. 4"
(102)
min. 4"
(102)
Refrigeration 183
Numbers indicated
inside parenthesis ( ) = mm