Filter
Top Products
The cooking range is operated by touch control
sensors. Touch the required sensor pad in the
shaded area as shown in the picture. You only need
to touch the pad with your finger, no pressure is
required. Every accepted input is confirmed by an
audible signal.
Always keep the control panel clean. Do not place
hot cooking dishes on the control panel.
When you touch more than one sensor pad
simultaneously or if any object (e.g. cooking spoon,
dish cloth) lie on the sensor pads, the appliance
registers this as an error. No input is registered and
several short tones are sounded.
When the appliance is switched on, a spot lights up
on the main switch symbol.
The given cooking level is shown on the display of
each cooking zone.
A flashing display shows that a value has not yet
been confirmed.
The residual heat display appears on the display of
the relevant cooking zone after switching off.
The moving zero in the cooking level display
indicates that, after switching off, a cooking zone
has still not cooled down to such an extent that it
can be safely touched.
8
3. Operating principles
Sensor pads
Residual heat display
Display