Filter
Top Products
19
5.2 Options menu
With the aid of the Options menu, you can
– choose between °C and °F on the temperature
display.
– choose between 12h and 24h on the time display.
– turn the timer on and off.
– start calibration.
– reset the descaling display.
Proceed as follows:
– Turn the two control knobs to the topmost
position.
– Press the (Confirm) key and keep it pressed.
– Turn the “Moisture level” knob to the right.
– Release the (Confirmation) key.
– By turning the “Moisture level” control knob, you
can now choose the various functions (Fig. 22):
Position 1:
temperature display either in °C or °F.
Position 2:
time display in 24 hours or 12 hours
(am and pm)
Position 3:
optional deactivation of the time
display when the appliance is off
Position 4:
calibration – you can now start the
calibration process when you turn the
“Temperature” control knob to any
position except light.
Position 5:
descaling, enter water hardness
– Set the required option by pressing the + or – key.
– Press the (Confirmation) key
– To quit the options menu, turn the “Moisture”
control knob back up or turn the “Temperature”
control knob.
End
Options menu
Time display
24h / 12h
(AM/PM)
Descaling
Start
Calibration
Temperature
display in
°C / °F
Time display
ON/OFF
(only if appliance is switched off)
Fig. 22