Gaggenau KG 291 CA Cooktop User Manual


 
Not every malfunction can be ascribed to a defect
of your cooktop. If your appliance does not function
properly, look for the fault in the list below.
If you are not successful in remedying the fault with
the aid of the list below, then contact your
Gaggenau after-sales service.
12. Trouble Shooting
19
Fault Remedy
The burner does not ignite, the indicator Is the burner correctly assembled?
light is flashing. Is the manual gas shut-off valve open?
Is the burner clean and dry?
Is the propane gas tank empty?
Is there an air pocket in the gas supply line after
changing the propane gas tank?
Turn all control knobs off and switch on again.
If necessary, inform after-sales service.
The burner does not ignite, the indicator Check whether the domestic fuse has tripped.
lights are off.
The gas flame goes off during operation, Turn all control knobs off. The flashing indicator lights
re-ignition is unsuccessful, all burners off, go off, except for the indicator of the affected burner.
the indicator lights of the switched on This indicator will continue to flash for a few seconds.
burners are flashing. Wait until the appliance has cooled down sufficiently,
then check this burner, whether
...the burner head cover is fitted correctly.
...the burner is soiled by boiled over food.
...the electrode is soiled (food remains). Carefully
clean the electrode.
...the propane gas tank is empty.
...the burner cannot ignite because of a strong draught
(for example open window behind the cooktop).
After a power failure, the appliance does not re-ignite
automatically.
After prolonged operation, all burners switch Overheating protection. Turn all control knobs off and
off, the indicator lights flash. wait for the indicator lights to go off.
Appliance does not react when switched on. Turn all control knobs off and disconnect the appliance
from the power supply for a few seconds (switch off
fuse). If necessary, inform after-sales service.
The flame tips are yellow and not blue. Check whether...
...the burners are clean and dry.
...the pot base or the pot grid are soiled.