Filter
Top Products
21
5. Loading the appliance door
When attaching the furniture doors it is recommended to
load the storage sections in the door with weights in order
to ensure that the when adjusting crack dimensions turn
out to be as precise as possible.
Loading recommendations:
6. Removing positioning aids
Unscrew the positioning aids from the appliance door.
Note:
The positioning aids will still be needed in the course of
mounting.
7. Fastening the adjusting rib to the
furniture door
1. Measure distance A between the adjusting rail and
the furniture parts above.
2. Loosen the two nuts (a) and remove the adjusting rib
(b).
3. Mark this value A on the rear side of the furniture
door.
4. Determine the middle of the door and label it.
5. Rest the adjusting rib on the furniture door and align
to the markings. Mark the drill holes.
6. Pre-drill the holes.
7. Tightly screw the adjusting rib.
The minimum number of screws required for this
depends on the width of the furniture door.
Appliance width Loading of the appliance door
18“ (45.1 cm) 22 lbs (10 kg)
24“ (60.3 cm) 33 lbs (15 kg)
30“ (75.6 cm) 44 lbs (20 kg)