Filter
Top Products
22
Notes:
– One screw should be screwed in under the threaded
rod in each case.
– The adjusting rib has a various holes for different
furniture door design variations. Always carry out
screwing jobs on the most stable part of the furniture
door.
8. Fastening the fixing rib to the
furniture door
Note:
The fixing ribs are pre-assembled for stainless steel
doors. In this case continue with the next installation step
(“C / 9. Mounting the furniture door”).
1. Hang the furniture door on the threaded rod (a).
2. Adjust the furniture door using the threaded rod (Torx
screwdriver).
Re-examine the dimensions of the crack
continuously. To do this, use the assembly
gauge (b).
3. Transfer the position of the fastening screws on the
outer edge of the appliance door to the furniture door
and mark.
4. Remove furniture door.
5. On both lengths of the furniture door, draw a parallel
with the help of the positioning aid.
6. Lengthen the markings to the parallels using an
angle of contact.
7. Apply the fixing ribs (b) and mark out the holes.
8. Pre-drill the holes.
9. Screw on the fixing ribs (b).
10. Hang the furniture door on the threaded rods.