Filter
Top Products
7.4 Fitting the cover
– The securing bracket is already fitted on the
trough.
– Place the lid in upright position and screw it down
firmly using the included shett metal screws.
(Fig. 12).
– Close the appliance cover. Important: it must lie
on the panel. If the appliance cover closes at an
angle, undo the screws of the securing bracket
(Fig. 13), align the appliance cover and retighten
the screws.
Note:
If you have fitted the appliance cover on the
appliance, it must not be closed until the appliance
has cooled down completely. Do not operate the
appliance with the cover closed! Heat development
may damage the appliance and the cover. Do not
use the appliance cover as a surface for placing
objects or for keeping things warm.
5080003892ind03 en 07.04 EB 17
Fig. 12
Fig. 13