Filter
Top Products
Part # 4521635 (03/04/08) Page 3
SECTION 1 –SAFETY
Description Of Warning Signs
Identies safety information about
dangers which may cause serious personal
injury if equipment is not operated
properly.
Dangerous voltage warning symbol,
indicates a risk of electric shock and
hazards from dangerous voltage.
CAUTION
Indicates a hazard or unsafe practice
which could result in minor personal
injury or property damage.
Electromagnetic eld.
Warning signs mounted directly on the cooker must be
observed at all times and kept in a fully legible condition.
Personnel Qualication And Training
All persons involved in assembly, installation, commissioning,
operation and maintenance must have the appropriate
qualications. The scope of responsibility, competence and
supervision of the sta must be dened and controlled.
Safety Information, Installation And Service
Operators of the equipment must ensure that all installation,
service and as well as all inspections, are performed by
authorized and qualied personnel. Before attempting to
operate the equipment carefully read the information and
instructions outlined in the ”Installations and Operating”
manual. For all installations, service, maintenance, repair
and or overhaul of the induction cookers, personnel must
be specially qualied and must have attended a technical
training course authorized by Garland.
Do not attempt to perform any repairs or replace any part of
the induction cooker unless, all power supply to the cooker
has been disconnected.
Unauthorized Reconstruction And
Use Of Spare Parts
Reconstruction of the cooker or changes to the cooker are
not allowed. Contact the manufacturer if you intend to do
any changes to the cooker. To guarantee safety, use only
genuine OEM spare parts and accessories, authorized by the
manufacturer. Garland will not be held liable for any damage
or injury caused by used of other components.
Improper Operating Methods
The operating reliability of the cookers can only be
guaranteed when the cooker is used appropriately. The limit
values stated in this manual must not be exceeded.