Stovax RVF40AVM Range User Manual


 
approximately one day. This allows the adhesive to fully
bond to the seal before use.
4.12 Lightly oil the door catch mechanism and hinge pins. Avoid
g
etting oil on to the door seals and glass.
4.13 To refresh painted finishes it is possible to re-paint using
S
tovax Riva Paint. Stainless steel trim parts may be cleaned
using Stovax Stainless Steel Cleaner.
Riva Paint - Storm: RVAC010
Riva Paint - Black: RVAC011
Stainless Steel Cleaner: 5035, 500ml
4.14 We recommend that only genuine Stovax replacement parts
are used to keep your appliance in safe and efficient
working order. Your local Stovax dealer will be able to
provide you with the genuine parts you require.
This is a list of the maintenance products you may need to use
Task Product name
Stovax Code
number
Glass cleaning Stove glass cleaner 500ml –
4111
wipe on
Stove glass cleaner –
spray on
4130
Preventing build-up Protector (15 sachets) 7002
of creosote in flue Protector (1kg tub) 7025
Sealing flue Fire Cement - 500g tub 2020
pipe joints Fire Cement - 600g cartridge 2021
Re-painting Storm Metallic RVAC010
Metallic Black RVAC011
Protecting your
Heat resistant leather gloves
4008
hands
Door sealing rope 16mm White rope seal – 5001
Handy pack
16mm White rope seal – 4096
20m reel
Glass sealing tape
20mm
x 2mm Black tape seal –
4998
Handy pack
20mm
x 2mm Black tape seal –
4997
20m reel
Fixing door seal
Thermic seal glue – 50ml 5037
Riva Avanti
Holding Tools Optional tool holder RVAC015
Riva Cube
Holding Tools Optinal Tool Holder RVAC001
13
MAINTENANCE and SERVICING
These products, all available from you local Stovax dealer,
along with regular maintenance and use of the correct fuels,
w
ill help you to keep your stove in the best possible
condition. If you require more information about Stovax
products visit our website www.stovax.com.
4.15 When using the stove for the first time again it is best to
b
urn the fire at a low output for the first day of use. This
will allow the new seals to settle and all new fixing glues
and paint to fully cure.
4.16 During this time the stove may give off some unpleasant
odours, and we recommend that you keep the room well
v
entilated during this period to avoid a build-up of fumes.
If you require help your local Stovax dealer will be able to
carry-out all of your service and maintenance requirements
for a reasonable cost.
5.1 To maintain efficient combustion the Riva stove is fitted
with a twin baffle system, consisting of upper and lower
baffles.
5.2 Allow the stove to cool fully before removing baffle system.
5.3 To remove the baffle, first remove the Log Guard from the
stove to give access to the firebox.
5.4 First remove the
Lower Baffle by lifting the front edge to
unhook it from the support bars, then pull the baffle
forward to disengage the rear edge from the location above
air inlet holes. Rotate the baffle to remove from the firebox
through the door opening.
5. FITTING AND REMOVAL OF BAFFLES
PR7151
All Models
Upper Baffle
Lower Baffle